Anker SOLIX · C1000
C1000 Portable Power Station 1056Wh
The Anker SOLIX C1000 Portable Power Station 1056Wh is sold on Amazon: check today's price there. We'll show it beside the other stores once our Amazon price feed is connected.
- Wall charging is fast: 80% in 43 minutes and 100% in 58 minutes with UltraFast Charge on.
- Solar input up to 600W refills the battery in about 1.8 hours.
- Has 11 outputs, including six AC outlets and a 100W USB-C port.
- At 28.44 lb it's heavier than the newer C1000 Gen 2.
- The 20ms UPS switchover is slower than the Gen 2's 10ms.
What it powers
On a full charge · tap to combineAt a glance
- Starts
- ✓
- ✓
- ✓
- ✓
- ✓
- ✓
- Wall outlet58 min
- Solar, 600W of panels2 h 30 min
Solar at about 70% of the panels' rating, a typical sunny day.
Works as a UPS: switches to battery in 20 ms or less when the power cuts out.
Should you buy it?
Buy it if
- Campers and RV or van travelers who want fast recharging between stops.
- Households that want outage backup for a fridge, router or medical devices, with a UPS switchover.
- Solar users who want to fill a 1kWh battery in about two hours with 600W of panels.
- Buyers who may want to double capacity to 2112Wh later with one expansion battery.
Skip it if
- Skip it if weight matters most; the C1000 Gen 2 is 24.9 lb and smaller.
- Skip it if you need a computer-grade UPS; look for a unit with a 10ms or faster switchover.
- Skip it if you need to run heavy 240V equipment or a whole home circuit; look at a larger station with higher output.
Is it right for you?
Tap what describes you. We weigh it against what we know about the C1000 Portable Power Station 1056Wh, in under a second.
An AI model weighs the product facts on this page. Nobody here has tested it for you, and it is not personal advice.
Guides that cover it
Full details
Who it suits
The SOLIX C1000 suits buyers who want about 1kWh of LiFePO4 storage, roughly one-hour wall charging, strong 600W solar input and the option to double capacity later. Know first that the C1000 Gen 2 now exists. It's lighter and has a stronger inverter and a faster UPS, but it stores slightly less energy.
- Wall charging is fast: 80% in 43 minutes and 100% in 58 minutes with UltraFast Charge on.
- Solar input up to 600W refills the battery in about 1.8 hours.
- Has 11 outputs, including six AC outlets and a 100W USB-C port.
- LiFePO4 battery rated for 3,000 cycles, expandable to 2112Wh with the BP1000.
- At 28.44 lb it's heavier than the newer C1000 Gen 2.
- The 20ms UPS switchover is slower than the Gen 2's 10ms.
- OutdoorGearLab found the cooling fan loud.
About the Anker SOLIX C1000 Portable Power Station 1056Wh
The Anker SOLIX C1000 Portable Power Station (product number A1761) is a mid-size battery generator. It pairs a 1056Wh lithium iron phosphate (LiFePO4) battery with a pure 120V inverter rated at 1800W continuous. Anker's SurgePad mode handles up to 2400W, which the company says covers 99% of household appliances. It has 11 outputs: six AC outlets, two USB-C ports (100W and 30W), two USB-A ports and a 120W car socket. Anker rates the battery for 3,000 cycles.
In daily use, the main advantage is charging speed. Turn on UltraFast Charge in the Anker app and the C1000 reaches 80% in 43 minutes and 100% in 58 minutes, drawing up to 1300W from a wall outlet. The XT60 solar input takes up to 600W, which Anker says fills the battery in about 1.8 hours. The unit can also stay plugged in as a UPS with a 20ms switchover, passing up to 1440W through in bypass mode. Wi-Fi and Bluetooth let you check the stats and set charging speed from your phone. It also has a built-in ambient light bar.
For more capacity, the C1000 works with exactly one BP1000 Expansion Battery, which takes it to 2112Wh. It doesn't support other batteries. Anker has since released the C1000 Gen 2. That model is slightly smaller in capacity at 1024Wh but has a 2000W inverter, 1600W AC charging, a 10ms UPS switchover and a 24.9 lb body. Next to it, the original C1000 offers a bit more stored energy, the expansion option and a full set of 11 ports, but weighs more and switches over more slowly.
Anker built the C1000 for campers, RV and van travelers, and households that want backup for a fridge, router or tools during an outage. Independent testers praised its fast charging, clear display and useful app. OutdoorGearLab flagged the fan as loud. TDCat found it fairly quiet at about 300W and noted very low standby drain.
- HyperFlash / UltraFast Recharging
- Takes up to 1300W from a wall outlet to reach 80% in 43 minutes and 100% in 58 minutes. UltraFast Charge mode has to be turned on in the Anker app.
- SurgePad Technology
- Lets the 1800W inverter run higher-draw appliances up to 2400W without shutting off, so it can handle more of your home and outdoor gear.
- 600W Solar Recharging
- The XT60 solar input takes up to 600W, which Anker says is enough for a full charge in about 1.8 hours of strong sun.
- Expandable Capacity
- Connecting one Anker SOLIX BP1000 Expansion Battery doubles capacity to 2112Wh, for longer outages or multi-day trips.
- InfiniPower with LFP Battery
- LiFePO4 cells rated for 3,000 cycles, plus components Anker rates for 50,000 hours of use, with battery temperature checked up to 100 times per second.
- UPS Function
- Switches connected devices to battery power within 20ms if the grid fails, and passes up to 1440W through in bypass mode.
- Smart App Control
- Connects by Wi-Fi and Bluetooth so you can see real-time stats, set charging speed and use timers to switch the AC or car outputs off.
- Unibody Drop-Proof Design and Ambient Light
- Anker says the shell protects against bumps, drops, UV light and fire, and a built-in light bar helps at a campsite.
How long will it run?
| A phone (full charges) (15 W) | About 59 charges |
|---|---|
| A Wi-Fi router (12 W) | About 3 days |
| A CPAP machine (no humidifier) (40 W) | About 22 hours |
| A laptop (60 W) | About 15 hours |
| A 55" LED TV (100 W) | About 9 hours |
| A full-size refrigerator (70 W) | About 13 hours |
| A chest freezer (45 W) | About 20 hours |
| A 1/3 HP sump pump (250 W) | About 3.5 hours |
| A 5,000 BTU window AC (450 W) | About 2 hours |
| A 1,000W microwave (1500 W) | About 35 minutes |
| A space heater on high (1500 W) | About 35 minutes |
Estimates on a full charge: 1,056Wh × 0.85 for inverter and battery losses ÷ the device’s average draw. Fridges and freezers cycle, so their average is far below their rating. Add up everything running at once and keep it under the 1,800 W AC output.
Specifications
| Brand | Anker SOLIX |
|---|---|
| Model | C1000 |
| Capacity | 1056Wh (2112Wh with BP1000 Expansion Battery) |
| AC output | 1800W (2400W SurgePad) |
| Battery | LiFePO4, 3,000 cycles |
| Weight | 28.44 lb (12.9 kg) |
| AC charging | 100% in 58 min (80% in 43 min) with UltraFast Charge on, 1300W max input |
| Solar input | 600W max via XT60 (100% in 1.8 hours) |
| Outlets | 11 (6 AC, 2 USB-C at 100W and 30W, 2 USB-A, 1 car socket at 120W) |
| UPS | 20ms |
In the box, setup and care
- Anker SOLIX C1000 Portable Power Station
- AC charging cable
- Solar charging cable
- Additional charging cable
Before the first use, charge the station fully from a wall outlet. To use the fastest wall charging, connect the Anker app and turn on UltraFast Charge. Charge it only between 32°F and 104°F; it can discharge from -4°F to 104°F. To expand it, connect a single BP1000 Expansion Battery with the supplied battery-to-host cable. The BP1000 can't be used on its own. Keep the vents clear, and don't clean the unit with harsh chemicals or detergents, because Anker's warranty excludes damage from them. Anker gives a 5-year limited warranty on purchases from Anker and its authorized resellers, starting on the purchase date. Coverage is limited to the country of purchase.
How long will the Anker SOLIX C1000 Portable Power Station 1056Wh run a refrigerator?
about 13 hours for a typical full-size fridge averaging 70 W as its compressor cycles. The Anker SOLIX C1000 Portable Power Station 1056Wh stores 1,056Wh; about 85% of that reaches a device through the AC outlets. A newer, efficient fridge runs longer; an old one or a hot kitchen, shorter.
How many nights will the Anker SOLIX C1000 Portable Power Station 1056Wh run a CPAP?
About 2 nights of 8 hours at 40 W with the humidifier off (about 22 hours in all). Running the CPAP from a DC cable instead of its AC brick adds roughly 10–15%; the humidifier can double the draw.
What can the Anker SOLIX C1000 Portable Power Station 1056Wh power, and for how long?
A phone (full charges): about 59 full charges. A Wi-Fi router: about 3 days. A laptop: about 15 hours. A 55" LED TV: about 9 hours. Its AC outlets deliver up to 1,800 W at once (2,400 W surge for motors starting). Add up what runs at the same time; keep it under the output rating.
How long does the Anker SOLIX C1000 Portable Power Station 1056Wh take to charge with solar?
About 2.5 hours of good sun with 600 W of panels connected (its maximum solar input), since panels give about 70% of their rating in real conditions. Fewer panels take proportionally longer.
What battery does the Anker SOLIX C1000 Portable Power Station 1056Wh use, and how long will it last?
LiFePO4 (lithium iron phosphate), rated for 3,000 cycles. That is about 8 years of a full charge and drain every day before it drops to around 70–80% of its capacity; with occasional use it will outlast most owners' needs.
Can the Anker SOLIX C1000 Portable Power Station 1056Wh work as a UPS for a computer or CPAP?
Yes. Plugged into the wall, it switches its outlets to battery in about 20 ms when the power drops, fast enough for most desktop computers, routers and CPAPs. It is not a substitute for a medical-grade backup for life-support equipment.
Anker SOLIX C1000 review: is it worth it?
Reviewers rate it highly as a mid-size station. OutdoorGearLab called it one of the best mid-sized power stations and praised its fast charging, display, UPS and built-in light, though it found the fan loud. TDCat liked its solar input, efficiency and low standby drain. It's worth it if you want 1056Wh, 1800W output and roughly one-hour recharging.
What's the difference in Anker SOLIX C1000 vs C1000 Gen 2?
The Gen 2 has 1024Wh, a 2000W inverter (3000W peak), 1600W wall charging to full in 49 minutes, a 10ms UPS and 10 ports, and it weighs 24.9 lb. The original C1000 holds slightly more (1056Wh), has an 1800W inverter with 2400W SurgePad, 11 ports, a 20ms UPS and BP1000 expansion, and it weighs 28.44 lb.
Can the Anker SOLIX C1000 run a fridge?
Yes. Most household fridges fall well within its 1800W continuous output, and SurgePad handles brief draws up to 2400W. Runtime depends on the fridge's average draw. With 1056Wh, a fridge averaging 100W would run several hours, not a full day, after inverter losses. Add the BP1000 expansion battery or solar input for longer outages.
How long does the Anker SOLIX C1000 take to charge?
From a wall outlet with UltraFast Charge turned on in the Anker app, it reaches 80% in 43 minutes and 100% in 58 minutes at up to 1300W input. With 600W of solar on the XT60 input, Anker quotes about 1.8 hours to full. You can lower the charging speed in the app if you'd rather charge more quietly.
Anker SOLIX C1000 solar charging: what panels work?
The C1000 takes solar through an XT60 port, and a solar charging cable comes in the box. It accepts up to 600W of solar input, which Anker says fills the battery in about 1.8 hours. Use panels that add up to 600W or less, and check that their voltage suits the XT60 input listed in the user guide.
Anker SOLIX C1000 expansion battery: how does it work?
The C1000 connects to one Anker SOLIX BP1000 Expansion Battery (1056Wh LiFePO4), which doubles total capacity to 2112Wh. It works only with the BP1000, and only one can be attached. The BP1000 can't be used on its own; it charges and discharges through the C1000. Anker says both units charge to full from AC in about 2 hours with UltraFast mode.
Can the Anker SOLIX C1000 be used as a UPS?
Yes. Anker lists a 20ms UPS switchover, and in bypass mode it passes up to 1440W from the wall to connected devices. That suits fridges, routers, lights and many electronics. Some desktop computers and sensitive equipment need a faster switchover, so check your device's requirements before relying on it.
Anker SOLIX C1000 battery life: how many cycles?
It uses LiFePO4 cells rated for 3,000 cycles, and Anker describes a 10-year lifespan. Anker's InfiniPower design also rates the electronics for 50,000 hours and monitors battery temperature up to 100 times per second. Charging is allowed from 32°F to 104°F.
What's in the box with the Anker SOLIX C1000?
Anker's support page lists the power station with a solar charging cable, an AC charging cable and an additional charging cable. Expansion batteries and solar panels are sold separately. The BP1000 comes with its own battery-to-host cable.
What warranty does the Anker SOLIX C1000 have?
Anker gives a 5-year limited warranty on SOLIX portable power stations bought from Anker or its authorized resellers, starting on the purchase date. It covers defects in workmanship or materials and is limited to the country of purchase. Damage, modification, disassembly and units bought from unauthorized resellers are excluded.
Written from ankersolix.com, ankersolix.com, support.ankersolix.com, support.ankersolix.com, ankersolix.com; last reviewed . Prices are never part of this text.
Page updated . Prices are checked every hour while on sale, every 6 hours otherwise.
More in mid-size power stations (500–1,499Wh)
See all- Anker SOLIX · A1763
C1000 Gen 2 Portable Power Station 1024Wh
- Bluetti
Elite 100 mini Portable Power Station 1004.8Wh
1,004.8Wh · 700W (≥1,050W surge for 0.5 s; Power Lifting Mode up to 1,400W) · LiFePO4, 6,000+ cycles to 80%
- Bluetti · AC180
AC180 Portable Power Station 1152Wh
1,152Wh (36Ah) · 1,800W (2,700W surge / Power Lifting Mode for resistive loads) · LiFePO4, 3,500+ cycles to 80% capacity
