Bluetti Elite 30 V2 Portable Power Station 288Wh
288WhCapacity600WAC output3,000LiFePO4 cycles9.5 lbWeight

Bluetti · Compact power stations (under 500Wh)

Elite 30 V2 Portable Power Station 288Wh

The Bluetti Elite 30 V2 Portable Power Station 288Wh is sold on Amazon: check today's price there. We'll show it beside the other stores once our Amazon price feed is connected.

  • 600W continuous AC from a 9.48 lb box is strong output for a 288Wh station.
  • Turbo AC charging at 380W reaches 80% in about 45 minutes.
  • A 140W PD 3.1 USB-C port can fast-charge a MacBook Pro.
  • At 288Wh, runtime is short on anything bigger than electronics; a mini fridge lasts only a few hours.
  • No expansion battery support.

What it powers

On a full charge · tap to combine
3.5 h for full-size refrigerator · 70W

At a glance

600Wsteady output1,500W to start motors
  • Starts
  • ✓
  • ✓
  • ✕
  • ✓
  • ✕
  • ✕
Rechargeto 100%
  • Solar, 200W of panels2 h 6 min

Solar at about 70% of the panels' rating, a typical sunny day.

9.5 lbabout a gallon of milk and a laptop
One-hand carry
8.2 yearsof daily cycles (3,000)
LiFePO4: the long-life chemistry

Works as a UPS: switches to battery in 10 ms or less when the power cuts out.

Should you buy it?

Buy it if

  • Campers, drone pilots and photographers who need a station they can carry in one hand.
  • Home users who want ≤10ms UPS protection for a router, modem or work laptop.
  • CPAP users who need overnight backup for a low-draw machine.
  • Road-trippers charging several laptops and phones from 140W and 100W USB-C ports.

Skip it if

  • You need to run a fridge or appliances through a long outage; look at a 1,000Wh+ station like the Elite 100 V2.
  • You want to add capacity later; choose a model that accepts expansion batteries.
  • You only charge phones and a tablet; a smaller unit like the Elite 10 is lighter.

Is it right for you?

Tap what describes you. We weigh it against what we know about the Elite 30 V2 Portable Power Station 288Wh, in under a second.

An AI model weighs the product facts on this page. Nobody here has tested it for you, and it is not personal advice.

Guides that cover it

Full details

Who it suits

Get the Elite 30 V2 if you want a light, quick-charging LiFePO4 station for laptops, phones, a router or a CPAP, with real UPS protection and a 5-year warranty. Know before you buy that 288Wh is a small tank, it can't be expanded, and the 1,500W Power Lifting mode doesn't raise the real 600W output.

  • 600W continuous AC from a 9.48 lb box is strong output for a 288Wh station.
  • Turbo AC charging at 380W reaches 80% in about 45 minutes.
  • A 140W PD 3.1 USB-C port can fast-charge a MacBook Pro.
  • ≤10ms UPS with 980W bypass protects routers and PCs during outages.
  • At 288Wh, runtime is short on anything bigger than electronics; a mini fridge lasts only a few hours.
  • No expansion battery support.
  • Solar input tops out at 200W.

About the Bluetti Elite 30 V2 Portable Power Station 288Wh

The BLUETTI Elite 30 V2 Portable Power Station is a compact 288Wh lithium iron phosphate (LiFePO4) unit with a 600W pure sine wave inverter. It weighs 9.48 lb (4.3 kg) and measures 9.8 × 7 × 6.6 in. Reviewers describe it as the 2025 successor to BLUETTI's popular EB3A. It sits near the bottom of BLUETTI's Elite range, and BLUETTI pitches it at beginners, CPAP backup, short day trips and charging small devices.

In daily use it's mainly a device charger and light-appliance runner. There are nine outputs: two 120V AC outlets that share 600W, a 12V car socket, two DC5521 barrel ports, two 15W USB-A ports, and two USB-C ports. One USB-C port follows PD 3.1 and delivers up to 140W, which is enough for a MacBook Pro; the other gives 100W. Power Lifting mode lets resistive loads like hair dryers or kettles run on a device rated up to 1500W, but it does this by lowering the voltage, so the actual output stays at 600W. You can charge it from the wall at up to 380W in Turbo mode (about 45 minutes to 80%), from solar at up to 200W, or from a car socket. The BLUETTI app connects over Wi-Fi and Bluetooth.

Several things stand out for a station this size. It has a ≤10ms UPS with 980W bypass, so it can keep a router or desktop running through an outage. BLUETTI says its UltraCell technology cuts self-consumption by up to half, with standby as low as 4.5W. The warranty is five years. The trade-offs are clear, though. There's no expansion battery option, the 288Wh capacity limits runtime, and the IP20 rating means it should stay dry. Compared with the 128Wh Elite 10, you get more than twice the capacity, three times the AC output and two more years of warranty. The Elite 100 V2 above it moves to 1,024Wh and 1,800W but weighs about 25 lb.

It's designed for people who want real AC outlets in a box they can carry one-handed: campers, drone pilots and photographers, road-trippers, and home users who want short UPS protection for a router, laptop or CPAP.

≤10ms Pro-Grade UPS Backup
Switches to battery within 10ms when the grid drops, with 980W of bypass power, so routers, PCs and other sensitive devices stay on.
Power Lifting (1,500W)
Lets resistive devices such as hair dryers or kettles rated up to 1,500W run by lowering their voltage; actual output stays at 600W.
140W PD Fast Charging
A PD 3.1 USB-C port delivers up to 140W for high-power laptops, alongside a second 100W USB-C port.
UltraCell Technology
BLUETTI says it cuts self-consumption by up to 50% with standby as low as 4.5W, so more of the 288Wh reaches your devices.
Long-Lasting LFP Battery
LiFePO4 cells rated for 3,000+ cycles and a claimed 10-year lifespan, backed by a 5-year warranty.
Turbo AC charging
Charges at up to 380W from the wall, reaching 80% in about 45 minutes. Standard and Silent modes charge at 200W for quieter, gentler charging.
9 Versatile Outlets
Two AC outlets, a car socket, two DC5521 barrel ports, two USB-A and two USB-C ports let you power a laptop, router and lamp at the same time.
BLUETTI app
Wi-Fi and Bluetooth control for checking status, changing charging modes and setting charge limits from your phone.

How long will it run?

A phone (full charges) (15 W)About 16 charges
A Wi-Fi router (12 W)About 20 hours
A CPAP machine (no humidifier) (40 W)About 6 hours
A laptop (60 W)About 4 hours
A 55" LED TV (100 W)About 2.5 hours
A full-size refrigerator (70 W)About 3.5 hours
A chest freezer (45 W)About 5.5 hours
A 1/3 HP sump pump (250 W)Too big to start: needs about 1,800 W for a moment
A 5,000 BTU window AC (450 W)About 30 minutes
A 1,000W microwave (1500 W)Needs more than its 600 W output
A space heater on high (1500 W)Needs more than its 600 W output

Estimates on a full charge: 288Wh × 0.85 for inverter and battery losses ÷ the device’s average draw. Fridges and freezers cycle, so their average is far below their rating. Add up everything running at once and keep it under the 600 W AC output.

Specifications

BrandBluetti
Capacity288Wh (18Ah)
AC output600W pure sine wave, 120V (1500W Power Lifting for resistive loads only)
BatteryLiFePO4, 3,000+ cycles to 80%
Weight9.48 lb (4.3 kg)
AC charging380W Turbo; 80% in about 45 min, about 70 min to full
Solar input200W max (12–28V, 10A)
Outlets9 (2 AC, 1 car socket, 2 DC5521, 2 USB-A, 2 USB-C at 140W + 100W)
UPS≤10ms switchover, 980W bypass

In the box, setup and care

  • Elite 30 V2 Portable Power Station
  • AC Charging Cable (1.5 m)
  • Car Charging Cable (0.72 m)
  • Grounding Screw (M5×8, ×1)
  • Documentation

The setup is simple. Charge it fully with the included AC cable, then install the BLUETTI app if you want to set charging modes (Turbo 380W, or Standard and Silent at 200W) or charge limits. Don't plug the unit's AC charging cable into its own AC outlets. The unit is rated IP20, so keep it indoors or otherwise dry. BLUETTI warns against leaving it below 5% charge. If it does hit zero in storage, let it sit at 5–35°C for about six hours, then recharge it within 48 hours. The storage range is -4°F to 104°F. A grounding screw is included for setups that need grounding. BLUETTI rates the LiFePO4 pack for 3,000+ cycles and backs the unit with a 5-year warranty.

How long will the Bluetti Elite 30 V2 Portable Power Station 288Wh run a refrigerator?

about 3.5 hours for a typical full-size fridge averaging 70 W as its compressor cycles. The Bluetti Elite 30 V2 Portable Power Station 288Wh stores 288Wh; about 85% of that reaches a device through the AC outlets. A newer, efficient fridge runs longer; an old one or a hot kitchen, shorter.

How many nights will the Bluetti Elite 30 V2 Portable Power Station 288Wh run a CPAP?

Not quite one: about 6 hours at 40 W with the humidifier off, short of a full 8-hour night. Running the CPAP from a DC cable instead of its AC brick adds roughly 10–15%; the humidifier can double the draw.

What can the Bluetti Elite 30 V2 Portable Power Station 288Wh power, and for how long?

A phone (full charges): about 16 full charges. A Wi-Fi router: about 20 hours. A laptop: about 4 hours. A 55" LED TV: about 2.5 hours. Its AC outlets deliver up to 600 W at once (1,500 W surge for motors starting). Add up what runs at the same time; keep it under the output rating.

How long does the Bluetti Elite 30 V2 Portable Power Station 288Wh take to charge with solar?

About 2.1 hours of good sun with 200 W of panels connected (its maximum solar input), since panels give about 70% of their rating in real conditions. Fewer panels take proportionally longer.

What battery does the Bluetti Elite 30 V2 Portable Power Station 288Wh use, and how long will it last?

LiFePO4 (lithium iron phosphate), rated for 3,000 cycles. That is about 8 years of a full charge and drain every day before it drops to around 70–80% of its capacity; with occasional use it will outlast most owners' needs.

Can the Bluetti Elite 30 V2 Portable Power Station 288Wh work as a UPS for a computer or CPAP?

Yes. Plugged into the wall, it switches its outlets to battery in about 10 ms when the power drops, fast enough for most desktop computers, routers and CPAPs. It is not a substitute for a medical-grade backup for life-support equipment.

Is the Bluetti Elite 30 V2 worth it?

It's worth it if you need a light station for electronics and short outages. Reviewers at T3, TechRadar and MacRumors rated it highly for its 600W output in a 9.48 lb body, fast 380W wall charging, 140W USB-C, ≤10ms UPS and 5-year warranty. The main limit is the 288Wh capacity. If you want to run appliances for long periods, a larger station will suit you better.

Bluetti Elite 30 V2 vs Elite 100 V2: what's the difference?

The Elite 100 V2 holds 1,024Wh and puts out 1,800W, with 2,700W Power Lifting and 1,000W solar input. It's rated for 4,000 cycles but weighs about 25 lb. The Elite 30 V2 has 288Wh, 600W output and 200W solar, and weighs 9.48 lb. Choose the 100 V2 for home office backup and bigger appliances. Choose the 30 V2 if portability matters more.

Elite 30 V2 vs Elite 10: which should I get?

The Elite 30 V2 has about 288Wh and 600W against the Elite 10's roughly 128Wh and 200W, so it runs devices for about twice as long and handles bigger loads. It also adds a 140W USB-C port, Wi-Fi control and a 5-year warranty instead of 3 years. The Elite 10 is much lighter at 1.8 kg and has a built-in LED light.

Can the Bluetti Elite 30 V2 run a fridge or CPAP?

MacRumors says it may get a CPAP through a night, depending on the machine's draw, and could run a mini fridge for a few hours. A 288Wh battery won't keep a full-size fridge going through a long outage. For CPAP use, check your machine's wattage, and turn off the humidifier if possible to stretch runtime.

How long does the Elite 30 V2 take to charge from the wall?

In Turbo mode it charges from AC at up to 380W and reaches 80% in about 45 minutes at 25°C, with a full charge in about 70 minutes. Standard and Silent modes charge at 200W, which is slower and quieter. You can also charge it from a car socket, at 120W from 12V or 240W from 24V.

How do I solar charge the Bluetti Elite 30 V2?

It accepts up to 200W of solar through its DC input, at 12–28V and 10A. BLUETTI also sells it in kits with 60W and 100W foldable panels. The input is capped at 200W, so a single panel of about that size is the practical maximum, and solar refills take a few hours in good sun.

Is the Elite 30 V2 expandable with an extra battery?

No. The Elite 30 V2 doesn't support expansion batteries, so 288Wh is all the capacity it will ever have. If you think you'll need more runtime later, choose a larger station now, such as the 1,024Wh Elite 100 V2. Reviewers also note that model doesn't expand either.

Can I use the Bluetti Elite 30 V2 as a UPS?

Yes. Leave it plugged into the wall with your devices connected. If the power fails, it switches to battery in 10ms or less, and it can pass through up to 980W while on grid power. That suits routers, modems, PCs and CPAPs. Runtime on battery is limited by the 288Wh capacity.

How long does the Elite 30 V2 battery last and what is the warranty?

BLUETTI rates the LiFePO4 pack for 3,000+ cycles to 80% capacity and claims up to 10 years of service life. The unit has a 5-year warranty. To protect the battery, avoid leaving it below 5% charge, and recharge it within 48 hours if it drains fully in storage.

What's in the box with the Bluetti Elite 30 V2?

BLUETTI's manual lists the Elite 30 V2 power station, a 1.5 m AC charging cable, a 0.72 m car charging cable, one M5×8 grounding screw and the documentation. Solar panels are sold separately or in BLUETTI's bundles with 60W or 100W panels.

Written from bluettipower.com, bluettipower.com, s4.bluettipower.com, t3.com, techradar.com; last reviewed . Prices are never part of this text.

Page updated . Prices are checked every hour while on sale, every 6 hours otherwise.

More in compact power stations (under 500Wh)

See all
  • Jackery

    Explorer 300 Portable Power Station 293Wh

    293Wh (291.84Wh) · 300W (500W surge), pure sine wave · Lithium-ion NMC, 500 cycles

    293Wh7.1 lb