Bluetti Elite 300 Portable Power Station 3014.4Wh
3,014WhCapacity2,400WAC output6,000LiFePO4 cycles58 lbWeight

Bluetti · Home backup power stations (3,000Wh+)

Elite 300 Portable Power Station 3014.4Wh

The Bluetti Elite 300 Portable Power Station 3014.4Wh is sold on Amazon: check today's price there. We'll show it beside the other stores once our Amazon price feed is connected.

  • It packs 3,014.4Wh into a 14.4 × 12 × 11.7 in body weighing 58 lb, compact for its class.
  • StorageReview measured the UPS switchover at 8 ms, inside BLUETTI's ≤10 ms rating.
  • It charges fully from the wall in about 2 hours, or reaches 80% in 78 minutes with AC and solar together.
  • It has no expansion port, so capacity is fixed at 3,014.4Wh.
  • Its 2,400W rating is lower than the smaller Elite 200 V2 and some 3kWh rivals, and Power Lifting only works for resistive loads.

What it powers

On a full charge · tap to combine
37 h for full-size refrigerator · 70W

At a glance

2,400Wsteady output4,800W to start motors
  • Starts
  • ✓
  • ✓
  • ✓
  • ✓
  • ✓
  • ✓
Rechargeto 80%
  • Wall outlet1 h 18 min
  • Solar, 1,200W of panels2 h 54 min

Solar at about 70% of the panels' rating, a typical sunny day.

58 lbabout a bag of concrete mix
Two-hand lift
16 yearsof daily cycles (6,000)
LiFePO4: the long-life chemistry

Works as a UPS: switches to battery in 10 ms or less when the power cuts out.

Should you buy it?

Buy it if

  • Homeowners who want overnight outage backup for a fridge, router and lights, with a 10 ms UPS.
  • RV owners who want to plug the TT-30 shore cord straight in and run 12V/30A pumps.
  • Off-grid campers with large solar arrays who can use up to 1,200W of input.
  • People who want about 3kWh in a cube roughly the size of a desktop PC.

Skip it if

  • You may want to add storage later: look for a station that accepts expansion batteries.
  • You need to run several heavy appliances above 2,400W at once: look for a 3,600W-class inverter.
  • You need to move it often or up stairs: consider a wheeled model like the Elite 400 or a smaller station.

Is it right for you?

Tap what describes you. We weigh it against what we know about the Elite 300 Portable Power Station 3014.4Wh, in under a second.

An AI model weighs the product facts on this page. Nobody here has tested it for you, and it is not personal advice.

Guides that cover it

Full details

Who it suits

The Elite 300 suits buyers who want about 3kWh of LiFePO4 backup with a fast UPS, fast wall and solar charging and direct RV hookups, in a box smaller than most 3kWh stations. The one thing to know first is that capacity is fixed: it can't add expansion batteries, so choose a different model if you may need more storage later.

  • It packs 3,014.4Wh into a 14.4 × 12 × 11.7 in body weighing 58 lb, compact for its class.
  • StorageReview measured the UPS switchover at 8 ms, inside BLUETTI's ≤10 ms rating.
  • It charges fully from the wall in about 2 hours, or reaches 80% in 78 minutes with AC and solar together.
  • Built-in TT-30 and 12V/30A ports let it connect to an RV without adapters.
  • It has no expansion port, so capacity is fixed at 3,014.4Wh.
  • Its 2,400W rating is lower than the smaller Elite 200 V2 and some 3kWh rivals, and Power Lifting only works for resistive loads.
  • At 58 lb it is tiring to carry, and Notebookcheck measured fan noise above 50 dB under heavy load.

About the Bluetti Elite 300 Portable Power Station 3014.4Wh

The BLUETTI Elite 300 Portable Power Station is a 3,014.4Wh LiFePO4 battery with a 2,400W pure sine wave inverter. BLUETTI pitches it as one of the smallest 3kWh stations available. It measures 14.4 × 12 × 11.7 inches and weighs 58 lb, so it takes up roughly the space of a compact desktop PC. The battery is rated for more than 6,000 cycles to 80% capacity.

Day to day, it works as a fixed home backup or a unit you move between the house, the RV and the campsite. It has 11 outputs: four AC outlets, a NEMA TT-30 RV outlet, a 12V/30A DC port, two 15W USB-A ports, 100W and 140W USB-C ports and a 120W car outlet. A 1,800W wall input fills it in about 2 hours. Running wall and solar charging together raises the total to 2,400W, which reaches 80% in 78 minutes. Pass-through charging and a UPS switchover of 10 ms or less let it sit between the wall and a computer or router. StorageReview measured the switchover at 8 ms. You can monitor it over Wi-Fi or Bluetooth in the app.

Within BLUETTI's Elite range, it sits between the Elite 200 V2 and the Elite 400. The Elite 200 V2 stores 2,073.6Wh and has a higher 2,600W rating. The Elite 400 stores 3,840Wh and rolls on wheels with a telescoping handle. Compared with rival 3kWh units such as the EcoFlow DELTA 3 Ultra, the Elite 300 gives up inverter output but accepts more solar. Its main limit is that it has no expansion port. BLUETTI's own batteries can only charge it through the separate Charger 2.

It was designed for buyers who care more about runtime than peak wattage: overnight outage backup for a fridge, network gear and lights, RV owners who want a direct TT-30 hookup, and off-grid users with a large solar array. Notebookcheck measured about 2,650Wh delivered from AC at a steady load of roughly 200W, which is good efficiency. It also recorded fan noise above 50 dB under heavy load.

3,014.4Wh LiFePO4 battery
About 3kWh of storage rated for 6,000+ cycles to 80%, which is enough to carry a fridge, router and lights through a long outage.
2,400W rated output with Power Lifting
Runs most household appliances at the same time. Power Lifting mode drives heaters, hair dryers, stoves and other purely resistive loads up to 4,800W.
≤10 ms UPS switchover
If grid power drops, it switches connected computers and storage devices to battery without interruption. AC bypass passes up to 1,800W through on the US model.
AC + solar dual charging
Wall and solar input together reach 2,400W, for 80% in 78 minutes and a full charge in about 1.6 hours. Wall power alone fills it in about 2 hours.
1,200W solar input
Accepts 12–60V at up to 22A. BLUETTI recommends specific series and parallel layouts for its PV200, PV350 and SORA 500 panels to get the most input.
RV-ready TT-30 and 12V/30A ports
Plug an RV's shore cord straight into the NEMA TT-30 outlet, and run high-current 12V gear such as water pumps from the 12V/30A port.
Charger 1 / Charger 2 car charging
Optional alternator chargers add 560W (Charger 1) or 1,200W (Charger 2) of charging while driving. The standard 12V car socket gives only 100W.
App control over Wi-Fi and Bluetooth
Shows power flows and remaining runtime and lets you control the unit remotely. Standby draw is 4W with the AC and DC outputs off.

Elite 300 Portable Power Station 3014.4Wh vs the alternatives

vs BLUETTI Elite 200 V2 Portable Power Station
The step down holds 2,073.6Wh, about 940Wh less, but has a higher 2,600W rated output and weighs about 53.4 lb. It accepts 1,000W of solar against the Elite 300's 1,200W. Pick it if your loads fit within about 2kWh.
vs BLUETTI Elite 400 Portable Power Station
The step up stores 3,840Wh and adds wheels and a telescoping handle. It is rated at 2,600W with 3,900W of Power Lifting, and reviewers list a 15 ms UPS switchover.
vs EcoFlow DELTA 3 Ultra
A close 3kWh rival at 3,072Wh. It has a stronger 3,600W inverter but accepts only 800W of solar against the Elite 300's 1,200W.

How long will it run?

A phone (full charges) (15 W)About 170 charges
A Wi-Fi router (12 W)About 9 days
A CPAP machine (no humidifier) (40 W)About 3 days
A laptop (60 W)About 43 hours
A 55" LED TV (100 W)About 26 hours
A full-size refrigerator (70 W)About 37 hours
A chest freezer (45 W)About 2 days
A 1/3 HP sump pump (250 W)About 10 hours
A 5,000 BTU window AC (450 W)About 5.5 hours
A 1,000W microwave (1500 W)About 1.5 hours
A space heater on high (1500 W)About 1.5 hours

Estimates on a full charge: 3,014Wh × 0.85 for inverter and battery losses ÷ the device’s average draw. Fridges and freezers cycle, so their average is far below their rating. Add up everything running at once and keep it under the 2,400 W AC output.

Specifications

BrandBluetti
Capacity3,014.4Wh
AC output2,400W continuous (4,800W surge; 4,800W Power Lifting for resistive loads)
BatteryLiFePO4, 6,000+ cycles to 80%
Weight58 lb (26.3 kg)
AC charging1,800W, full in 2 hours; 80% in 78 min with AC + solar (2,400W combined)
Solar input1,200W max (12–60V, 22A)
Outlets11 (4 AC, 1 TT-30, 1 12V/30A, 2 USB-A, 2 USB-C, 1 car outlet)
UPS≤10 ms switchover

In the box, setup and care

  • Elite 300 Portable Power Station
  • AC charging cable
  • Grounding screw (M5 × 10 mm)
  • Documents (user manual)

Setup is plug-and-go. BLUETTI's manual says the unit must be grounded when connected to the grid, and the AC charging cable includes a grounding conductor. A grounding screw is in the box. The solar and car charging cables are sold separately. Charge between 32°F and 104°F; it can discharge from -4°F to 104°F. The unit has no weatherproofing, and one review lists it as IP20, so keep it dry and out of dust when you use it outdoors. It draws about 4W in standby with outputs off. One reviewer saw only about 1% self-discharge over three days of storage. Published spec sheets list a 5-year warranty.

How long will the Bluetti Elite 300 Portable Power Station 3014.4Wh run a refrigerator?

about 37 hours for a typical full-size fridge averaging 70 W as its compressor cycles. The Bluetti Elite 300 Portable Power Station 3014.4Wh stores 3,014Wh; about 85% of that reaches a device through the AC outlets. A newer, efficient fridge runs longer; an old one or a hot kitchen, shorter.

How many nights will the Bluetti Elite 300 Portable Power Station 3014.4Wh run a CPAP?

About 8 nights of 8 hours at 40 W with the humidifier off (about 3 days in all). Running the CPAP from a DC cable instead of its AC brick adds roughly 10–15%; the humidifier can double the draw.

What can the Bluetti Elite 300 Portable Power Station 3014.4Wh power, and for how long?

A phone (full charges): about 170 full charges. A Wi-Fi router: about 9 days. A laptop: about 43 hours. A 55" LED TV: about 26 hours. Its AC outlets deliver up to 2,400 W at once (4,800 W surge for motors starting). Add up what runs at the same time; keep it under the output rating.

How long does the Bluetti Elite 300 Portable Power Station 3014.4Wh take to charge with solar?

About 3.6 hours of good sun with 1,200 W of panels connected (its maximum solar input), since panels give about 70% of their rating in real conditions. Fewer panels take proportionally longer.

What battery does the Bluetti Elite 300 Portable Power Station 3014.4Wh use, and how long will it last?

LiFePO4 (lithium iron phosphate), rated for 6,000 cycles. That is about 16 years of a full charge and drain every day before it drops to around 70–80% of its capacity; with occasional use it will outlast most owners' needs.

Can the Bluetti Elite 300 Portable Power Station 3014.4Wh work as a UPS for a computer or CPAP?

Yes. Plugged into the wall, it switches its outlets to battery in about 10 ms when the power drops, fast enough for most desktop computers, routers and CPAPs. It is not a substitute for a medical-grade backup for life-support equipment.

What do Bluetti Elite 300 reviews say?

Reviewers praise how much capacity fits in a small box, the useful mix of ports including TT-30 and 12V/30A, and the fast UPS switchover, which StorageReview measured at 8 ms. Reviewed found it quiet at everyday loads and saw only 1% self-discharge over three days. On the downside, reviewers cite the 58 lb weight, fan noise above 50 dB under heavy load in Notebookcheck's test, and the lack of expansion.

Is the Bluetti Elite 300 worth it?

It's a good fit if runtime is your main concern. You get 3,014.4Wh of LiFePO4 rated for 6,000+ cycles, a ≤10 ms UPS, 1,200W solar input and a 2-hour wall recharge in a compact case. It's less suitable if you need more than 2,400W of continuous output or may want to add batteries later, because it has no expansion port. For RV owners, the built-in TT-30 outlet adds real convenience.

What's the difference between the Bluetti Elite 300 and the Elite 200 V2?

The Elite 300 stores 3,014.4Wh, about 45% more than the Elite 200 V2's 2,073.6Wh. It also accepts more solar (1,200W vs 1,000W) and adds a TT-30 and 12V/30A port. The Elite 200 V2 has a higher 2,600W rated output and is about 4.6 lb lighter. BLUETTI's own guide says the Elite 300 is the upgrade when runtime, not inverter power, is your limit.

Should I get the Bluetti Elite 300 or the Elite 400?

The Elite 400 holds 3,840Wh against 3,014.4Wh and is rated at 2,600W versus 2,400W. It is built like rolling luggage, with wheels and a telescoping handle. The Elite 300 is the smaller, carry-by-handle box with a ≤10 ms UPS; reviewers list a 15 ms switchover for the Elite 400. Choose the 400 if you want more capacity and need to roll it around.

How does the Bluetti Elite 300 compare with the EcoFlow DELTA 3 Ultra?

Both are 3kWh-class stations: 3,014.4Wh for the Elite 300 and 3,072Wh for the DELTA 3 Ultra. The EcoFlow has a stronger 3,600W inverter for heavier simultaneous loads. The Elite 300 accepts more solar, 1,200W against 800W, and adds a 12V/30A port next to its TT-30 outlet. That makes it the better match for solar-heavy or RV setups that don't need more than 2,400W.

How long will the Bluetti Elite 300 run a refrigerator?

Runtime depends on how much energy the fridge uses per day. A full-size fridge using about 1 kWh per day should run for roughly 60 hours on a full charge, and a mini fridge using about 0.6 kWh per day for about 99 hours. BLUETTI's runtime math assumes 92% depth of discharge and 90% inverter efficiency, so expect around 2,500–2,650Wh of usable AC energy.

How do you charge the Bluetti Elite 300 with solar panels?

Use panels that total up to 1,200W within 12–60V and 22A. Wire panels in series to raise voltage and in parallel to raise current, and don't mix panel types. BLUETTI recommends two PV200s in series with the two strings in parallel (2S2P), or two PV350 or SORA 500 panels in parallel. Solar alone fills it in about 4.1 hours. The solar charging cable is sold separately.

Can you add an expansion battery to the Bluetti Elite 300?

No. The Elite 300 has no dedicated expansion port and cannot link directly with BLUETTI's B80, B230, B300, B300K or B500K batteries. The workaround is BLUETTI's separate Charger 2, which can use those batteries (except the B80) to recharge the Elite 300 instead of extending its capacity directly. If you expect to need more than about 3kWh, choose an expandable station.

Can the Bluetti Elite 300 work as a UPS for a computer?

Yes. BLUETTI rates the switchover at 10 ms or less, and StorageReview measured 8 ms, which is quick enough to keep computers, routers and storage devices running through an outage. Pass-through charging is supported, and the US model's AC bypass passes up to 1,800W while it is plugged in. Standby draw is 4W with outputs off.

What's in the box with the Bluetti Elite 300?

BLUETTI's manual lists the Elite 300 Portable Power Station, an AC charging cable, an M5 × 10 mm grounding screw and the documents. The solar charging cable and car charging cable are optional accessories sold separately, as are Charger 1 and Charger 2 for alternator charging. Published spec sheets list a 5-year warranty.

Written from bluettipower.com, s4.bluettipower.com, bluettipower.com.au, bluettipower.com, storagereview.com; last reviewed . Prices are never part of this text.

Page updated . Prices are checked every hour while on sale, every 6 hours otherwise.

More in home backup power stations (3,000Wh+)

See all
  • Jackery

    HomePower 3000 Portable Power Station 3072Wh

    3072Wh (60Ah/51.2V) · 3600W (7200W surge) · LiFePO4, 4000 cycles to 70%+ capacity

    3072Wh3600WAbout 59.52 lb
  • Jackery

    HomePower 3600 Plus Portable Power Station 3584Wh

    3584Wh (expandable to 21kWh per unit) · 3600W at 120V (7200W surge); 7200W 120V/240V with two units in parallel · LiFePO4, 6000 cycles to 70%+

    3584Wh77.2 lb1000W max